1. Introduction to top
The APSON 4M Sprayhead SH-2000 for high rotation atomizers is a
compact sprayhead with 4 medium valves. It is mainly designed for standard
spindle turbines used in the industry, but can be manufactured also after
customer's request.
The APSON Sprayhead SH-2000 is particularly suitable for
applications in automatic systems with aggressive media, e.g. lacquers,
solvents, caustic solutions, a.o. Due to the construction and the high
throughput it is very well rinsable and applicable for lacquers based on
solvents, or on customer's request for water-based, metalic and filler
lacquers equally well in roof and side machines.
-
Supply of up to 4 utilizable media directly in the sprayhead.
-
Environmental carefully due to minimum consumption of
utilizable medium.
-
Environmental carefully due to shortest rinsing times.
-
Cost-saving due to minimized consumption of rinsing
medium.
-
High throughput and very good rinsing barness.
-
Simple handling when assembling and in maintenance.
-
Deadthroomfree valves and media channels optimized for
throughput and rinsing.
3. Structure and Function to top
The APSON Sprayhead SH-2000 consists of:
-
Sprayhead base body and air shower body for the medium links
and valves for the utilizable medium,
-
Union nut for fastening the sprayhead body to the turbine
case,
-
Unscrewable air guidance ring within the front area,
-
Exchangeable lacquer tubing carrier with unscrewable pneumatic
air dissipator ring.
1=Turbine motor, 2=Turbine case, 3=Turbine bearings, 4=Turbine
shaft, 5=Sprayhead body , 6=Disk seal, 7=Lacquer tubing carrier,
8=Atomizer/Bell, 9=Valves
The base body and the air shower body contain the drillings and
threads for the circularly arranged utilizable medium valves and medium
connections as well as the color tubing carrier. The color tubing carrier
leads the utilizable media and the rinsing medium into the bell.
Furthermore it prevents the penetration of liquid media into the front
turbine bearing and supplies the bell with compressed air during the
operation.
The seals and fixing bolts for the color tubing carrier are supplied
in a separate spare-part/-seal package (see Ordering Data). To each
utilizable medium valve (bell valve) GVF1 to GVF4 is assigned a utilizable
medium entrance (color entrance) per FE1 to FE4. Additionally the
sprayhead has still a vent hole and further four connections.
-
RL - Connection for ring-air/guidance-air (Ringluft/Lenkluft),
serves for shaping the spraying cone
-
LG - Connection for solvent for the bell (Loesemittel fuer
Glocke), serves for rinsing the spraying bell
-
FTL - Connection for the lacquer tubing carrier cleanholding air
(Farbrohrtraeger Freihalteluft) prevents getting the bell dirty
-
FL - Connection for cleanholding air (Freihalteluft) prevents
penetration of liquids into turbine bearings
4. Technical Data to top
Denomination: |
APSON Sprayhead SH-2000 |
Media: |
Lacquers, solvents, caustic solutions, a.o. |
Media pressures: |
max. 10 bar |
Air pressures: |
max. 12 bar |
Materials: |
Aluminum and brass (brass for the thread of the guidance-air
dissipator) |
Seals: |
Viton compound™, or after customer's request |
Dimensions (in mm): |
-
Without valves and lacquer tubing carrier: D = 74.5;
H = 99
-
With valves and lacquer tubing carrier: D = approx. 105,
H = 114
|
Connections: |
-
LG - Tubing screw (SL) connection* M5 for tube 4x6
-
FL - Tubing plug-in connection* M5 for tube 2.7x4
-
FTL - Tubing plug-in connection* M5 for tube 2.7x4
-
RL - Tubing plug-in connection 1/8"-NPT for tube
6x8
-
FE1 to FE4 - Tubing screw (SL) connection G1/8" for tube
4x6
-
GVF1 to GVF4 - threads for APSON 2/2-Ways Valves
* = Connections with PA sealing
ring
|
Valves interfaces: |
for APSON 2/2-Ways Valves, in accordance with Ordering Data |
Color tubing carrier interface: |
for APSON Lacquer Tubing Carrier, in accordance with Ordering
Data |
Fastening: |
Union nut for turbine case, or after customer's request |
Mass: |
approx. 850 g, with union nut and union fittings, however without
valves and color tubing carrier |
5. Ordering Data to top
Denomination |
Part-Nr. |
APSON Sprayhead SH-2000, (without valves and lacquer tubing
carrier) |
100-0500 |
APSON 2/2-Ways Valve 2003 (accessory, 4 pieces) |
060-A011 |
APSON Guidance air Ring for Sprayhead Body - sparepart |
100-0498 |
APSON Union Nut for fastening to the Turbine Case - sparepart |
100-0226 |
APSON Lacquer Tubing Carrier SHC-2000 for 4 media (accessory,
1 piece) |
100-0499 |
APSON Pneumatic air dissipation Ring for Lacquer Tubing
Carrier SHC-2000 - sparepart |
100-0501 |
APSON Lacquer Tubing Carrier SHC-2000 for 4 media - sparepart
package |
300-0014 |