Pump Rinsingblock 2000
1. Introduction
Through the attachment of the APSON Pump
Rinsingblock 2000 to the rinsable types of the Barmag® lacquer
pumps for 6 or optionally 3 ccm/revolution, the lacquer pumps
can additionally be rinsed.
This enables a shorter rinsing cycle because the pump
and the lacquer line can be rinsed at the same time.
Thus shorter rinsing times are achieved with better pump cleaning
and more flexible rinsing concepts.
The APSON Pump Rinsingblock 2000 is particularly suitable to
the application in automatic systems for the processing of lacquers,
solvents, caustic solutions, a.o.
2. Structure and Function
The APSON Pump Rinsingblock 2000 consists of the following
components:
-
Inoxidable steel block: Interface to the pump and for the accommodation of the valves and access links;
-
Bypass valve: Hereby the lacquer line can be separated and be rinsed independently of the pump during the rinsing cycle;
-
A pulsation air valve and a solvent valve: These valves serve the pump for rinsing. During the rinsing cycle these two valves can be controlled alternatingly and rinse the pump with a mixture from air and solvent;
-
Feedback valve: For deriving the pump rinsing mixture into the receptacle;
-
Each a checkvalve in the supply links of the pulsation air and the solvent: These prevent during rinsing the penetration of solvent in the pulsation air supply or the penetration of compressed air into the solvent line.
All valves are controlled pneumatically. The following scheme
clarifies the functionality.
Legend:
PUB = Pump Rinsingblock 2000, MW = medium changer switch, Z = atomizer, BYP = bypass valve, PL = pulsation air valve, RF = feedback valve, PU = pump, SK = sprayhead, AB = receptacle, Mx = medium valve x, LO = solvent valve.
3. Features
-
Very effective cleaning of the pump, because this is additionally rinsable.
-
Cost saving because of short rinsing times.
-
Compact housing due to direct surface mounting on the pump.
-
Simplest handling at assembling and maintenance.
-
Faster and easy exchange of the valves.
-
Deathroom-free valves and visible switching status of the valves.
-
Pro-active maintenance possible due to leakage display of the valves.
4. Technical Data
| Denomination: | APSON Pump Rinsingblock 2000 |
| Media: | Lacquers, solvents, caustic solutions, a.o. |
| Medium pressure: | Max. 12 bar |
| Valve assembly: | Four APSON 2/2-Ways Valves 2000 |
| Material: | Inoxidable steel |
| Seal materials: | Teflon™, Viton™, or after customer's request |
| Valve control air pressure: | Min. 6 bar upto max. 8 bar, measured at the valves |
| Control air link: | For hose, D = 4 mm, d = 2.7 mm, or after customer's request |
| Solvent link LM: | For hose, D = 8 mm, d = 6 mm, or after customer's request |
| Pulsation air link PL: | For hose, D = 8 mm, d = 6 mm, or after customer's request |
| Bypass link BY: | For hose, D = 6 mm, d = 4 mm, or after customer's request |
| Medium output: | For hose, D = 6 mm, d = 4 mm, or after customer's request |
| Feedback link RF: | For hose, D = 8 mm, d = 6 mm, or after customer's request |
| Dimensions: |
|
| Attachment: | Directly on the pump |
| Mass: | approx. 1.5 kg |
5. Ordering Data
| Denomination | Part-Nr. |
| APSON Pump Rinsingblock 2000, completely (for the rinsable Barmag® pump with 6 ccm/revolution) | 030-A001 |
| APSON 2/2-Ways Valve 2000 (sparepart) | 060-A008 |
| APSON Checkvalve 2000 (sparepart) | 100-A001 |
Options:
-
Adapter for attaching to the rinsable Barmag® pump for 3 ccm/revolution.
APSON Lackiertechnik GmbH, Am Wiesengrund 15, D-63075 Offenbach
Mobile: +49-171-373-16-33 Phone: +49-69-82-369-447 Fax: +49-69-82-369-448
www.apson.de email@apson.de
Changes without notice reserved.
All trademarks are
productnames of their respective owners.