APSON logo

Skip Menu
:: Main Menu ::

^ To top

Lacquer Changer 2000 Modular

Page Menu

1. Introduction

^  0  1  2  3  4  5 
The APSON Lacquer Changer 2000 is particularly suitable for applications in automatic systems with chemically aggressive media, e.g. lacquers, solvents, caustic solutions, a.o. Due to the construction and the large throughput it is very good rinsable and usable both for normal lacquers and metalic lacquers. Furthermore, this type of lacquer change-over switch can be also used as rinsable distributor (one inlet, several outlets) or as rinsable concentrator (several inlets, one outlet).

2. Structure and Function

^  0  1  2  3  4  5 
The Lacquer Changer 2000 is standardly made of inoxidable steel.
Lacquer Changer 2000 modular
APSON Lacquer Changer 2000 (with cleaner block)
It consists of:
  • A selectable number of lacquer changer switch blocks.
  • A final lacquer changer switch block for the medium outlet.
  • An exchangeable APSON Pulse Cleaner or APSON Turbo Cleaner.
The lacquer changer switch blocks have a seal at each end of the output channel for sealing the neighbouring blocks as well as two pins each for centering the blocks when assembling the lacquer changer. Each block has two screweable sockets for pneumatically controllable APSON 2/2-Ways Lacquer Valves 200x.
During the rinsing cycle, the cleaner feeds several times alternating for short periodes solvent and air into the central channel.
Per block, maximal two channels can be independently connected through to the central channel. The lacquer changer is preferentially installed with the cleaner block at the top.

3. Features

^  0  1  2  3  4  5 
The APSON Lacquer Changer 2000 Modular has the following capability characteristics:
  • environmental carefully due to short rinsing times
  • cost-saving due to minimized medium consumption
  • high throughput and very good rinsing barness
  • simplest handling when assembling and at maintenance
  • very compactly and suitable for close spatial relations
  • deathroom-free valves, and rinsing and throughput-optimized medium channels
  • consists of inoxidable steel, thus durably and corrosion resistant
  • insensitive to caustic solutions and weak acids
  • scalable for the desired number of input media

4. Technical Data

^  0  1  2  3  4  5 
Denomination: APSON Lacquer Changer 2000 Modular
Media: Lacquers, solvent, caustic solutions, a.o.
Medium pressure: Max. 12 bar
Valve assembly: 2/2-ways lacquer valves for branch lines or constant medium circulation (see Options)
Materials: Inoxidable steel
Seals: Viton™, or on customer's request
Medium inlets: For hose D = 8 mm, d = 6 mm (or on customer's request)
Medium outlets: For hose D = 8 mm, d = 6 mm (or on customer's request)
Dimensions of one block:
  • Without valves: Length 70 mm, Width 45 mm, Height 40 mm
  • With valves: Length 150 mm, Width 45 mm, Height 40 mm
Mass: approx. 400 g per lacquer changer switch block
Changes without notice reserved.

5. Ordering Data

^  0  1  2  3  4  5 
Denomination Part-Nr.
APSON Lacquer Changer 2000 block, without cleaner 050-Axxx
APSON Pulse Cleaner 2000 (standard cleaner) 070-A005
APSON Turbo-Pulse Cleaner 2001 (alternative cleaner) 070-A002
APSON Turbo Cleaner 2002 (alternative cleaner) 070-A004
APSON 2/2-Ways Lacquer Valve 2000 (sparepart) 060-A008
Options:
  • Connection for ring circuit with constant medium circulation.

APSON Lackiertechnik GmbH, Am Wiesengrund 15, D-63075 Offenbach
Mobile: +49-171-373-16-33  Phone: +49-69-82-369-447  Fax: +49-69-82-369-448
www.apson.de  email@apson.de