Hose-Straight-Connectors

Hose-Straight-Connectors
Prospect ~ 0.38 MBDownload

1. Introduction to top

APSON Hose-Straight-Connectors and APSON Hose-Adaptors are mainly used in the coatings industry. They connect normal paint and solvent hoses with standard valve blocks and paint changers and with other connectors with compatible dimensions.
APSON Hose-Straight-Connectors and APSON Hose-Adaptors (a selection, without hose-nuts)

2. Features to top

  • Compatible with all block types according to the drawings of the following sections.
  • Robust construction, large throughput and good flushability.

3. Structure and Function to top

APSON Hose-Straight-Connectors and APSON Hose-Adaptors are usually made ​​of stainless steel or PETB. Due to their construction they allow connections with different connection blocks, tube diameters, and other connectors. For each connector the to be ordered hose nut is dependent on the outer diameter of the hose provided.
Caution
Hoses and fittings as installed, can still hold residual pressure and / or medium (paint, solvent, alkali, o.a.) even after system shutdown. Before handling these parts, make sure they are completely emptied, rinsed and with absolutely no pressure. The relevant safety regulations (fire protection, explosion protection, wearing of appropriate goggles, masks, gloves, protective clothing, etc.) must be followed.

In the following, the hose connectors are mainly classified according to:
  • Type of the thread: inches or metric.
  • Type of sealing surface: 90° conical, or 170° resp. 180° "flat" (see figure in section 13).
Hose connectors for tubes with small diameters usually have smooth connection ports. Some hose connectors for tubes with larger diameters have bulged ports for secure attachment. Other hose connectors are hose adaptors, hose Schott connectors, or other. There are also available connectors with other dimensions according to customer specifications.
APSON Hose-Straight-Connectors and Hose Nuts - General dimensions
Legend: G = Thread, SW = Wrench size, L = Length

4. Ordering Data to top

Annotations:
  • The desired hose nut (last column) is additionally to be ordered, because it is not always clear (some nuts can fit on various connectors, depending on the outer diameter of the tube).
  • Standard material is stainless steell 1.4305. Standard material is stainless steel 1.4305. Parts of other materials or other technical data are available according to customer specification.

5. M5 x 90° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose [mm] L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-1008 14 6x8 27 16 100-0118
100-1008 14 6x9 27 16 100-0198

6. M5 x 170° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose [mm] L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-1009 11 4x6 27 16 100-0505

7. G1/8" x 90° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose [mm] L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-0687 11 3x5 37 12.5 100-0688
100-0125 14 4x6 32 12.5 100-0128
100-0504 11 4x6 37 13 100-0505
100-0582 14 6x8 35 13 100-0118
100-0582 14 6x9 35 13 100-0198
100-0667 14 6x12 30 16 100-0200
100-0595 14 9x12 35 16 100-0597
100-1078 22 6x8 40 13 100-0118
100-1078 22 6x9 40 13 100-0198

8. G1/4" x 90° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-0628 14 3x5 35 18 100-0629
100-0228 14 4x6 35 18 100-0220
100-0230 14 4x6 27 13 100-0220
100-0327 # 15 4x6 50 18 100-0328
100-0329 # 15 6x8 50 18 100-0330
100-0202 14 6x8 27 18 100-0118
100-0229 14 6x8 35 18 100-0118
100-0229 14 6x9 35 18 100-0198
100-0202 14 6x9 27 18 100-0198
100-0149 14 8x10 32 18 100-0150
100-0596 14 9x12 35 16 100-0200
100-1131 19 11x14 40 20 100-1132
100-0669 22 14x18 40 18 100-0670
100-1324 17 DN4 43 13 100-1317
100-1313 17 DN6 43 13 100-1314
100-1333 14 6x8 35 13 100-1334
100-1333 14 6x9 35 13 100-0198
100-1335 14 8x10 35 13 100-1336
# = PETB

9. G1/4i x 90°, inner Thread to top

APSON Hose-Straight-Connectors G1/4" with inner Thread x 90° conical Sealing - Dimensions
Ord.-Nr. (1 of 2) SW [mm] Ø Hose [mm] L1 [mm] (approx.) Li [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-0919 14 6x8 20 7.5 100-0118
100-0919 14 6x9 20 7.5 100-0198

10. G1/4" x 170° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-1324/5 17 DN4 41 12 100-1317
100-1313/5 17 DN6 45 14 100-1314
100-1415/5 14 4x6 33 13 100-1342
100-1416/5 14 4x6 33 9 100-1342
100-0230/1 14 4x6 27 13 100-0220
100-1333/5 14 6x8 35 13 100-1334
100-1333/5 14 6x9 35 13 100-0198
100-1335/5 14 8x10 35 13 100-1336

11. G3/8" x 90° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose [mm] L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-1414 22 6x8 40 17.5 100-1334
100-1414 22 6x9 40 17.5 100-0198
100-1310 27 12x18.5 60 17 100-1315
100-1310 27 12x20 60 17 100-1337
100-1310 27 12x20.5 60 17 100-1456
100-1310/1 27 12x18.5 60 17 100-1315
100-1310/1 27 12x20 60 17 100-1337
100-1310/1 27 12x20.5 60 17 100-1456
../1 = hose port with bulge

12. G1/2" x 90° to top

Ord.-Nr. (1 of 2) SW [mm] Ø Hose [mm] L1 [mm] (approx.) L2 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-1311 27 12x18,5 65 19 100-1315
100-1311 27 12x20 65 19 100-1337
100-1311 27 12x20,5 65 19 100-1456
100-1311/1 27 12x18,5 65 19 100-1315
100-1311/1 27 12x20 65 19 100-1337
100-1311/1 27 12x20,5 65 19 100-1456
../1 = hose port with bulge

13. Cap Screws to top

APSON Cap Screws with 90° conical and 170° resp. 180° flat Sealing - Dimensions
Optionally Cap Screws can be delivered for Inbus keys.
Cap Screws 90°, conical
Ord.-Nr. Thread SW [mm] L1 [mm] (approx.) L2 [mm] (approx.) Note
100-0509 G1/8" 11 16.5 13 -
100-0181 G1/4" 14 17.5 12.5 -
Cap Screws 170°, "flat"
Ord.-Nr. Thread SW [mm] L1 [mm] (approx.) L2 [mm] (approx.) Note
100-0509/5 G1/8" 11 16.5 13 -
100-0181/5 G1/4" 14 16.5 11.5 -
Cap Screws 180°, flat
Ord.-Nr. Thread SW [mm] L1 [mm] (approx.) L2 [mm] (approx.) Note
200-0573 RP1/4" 14 16.5 11.5 long
200-0574 RP1/8" 5, inner 11.5 8 long
200-0496 RP3/8" 8, inner 12 7.5 long

14. Double Connectors to top

APSON Hose Double Connectors - Dimensions
Ord.-Nr. (1 of 2) SW Ø Hose1 / Ø Hose2 L1 [mm] (approx.) Hose Nut Ord.-Nr. (2 of 2)
100-1035 25 9x12 / 6x8 47.5 100-0597 / 100-1334
100-1063 27 12x16 / 12x16 47 100-1064 (2x)

15. Schott Connectors to top

APSON Schott Connectors - Dimensions
Ord.-Nr. (1 of 3) SW Ø Hose1 / Ø Hose2 L1 [mm] (approx.) D [mm] SLM1 / SLM2 Ord.-Nr. (2 of 3) KM Counter Nut Ord.-Nr. (3 of 3)
100-1341 19 4x6 / DN6 58 M16x1.5 100-1342 / 100-1314 100-1380
100-1395 22 DN6 / DN6 60 M18x1 100-1314 (2x) 200-0540

16. Cutting Ring Adaptors to top

This type of adapter each consists of O-ring (1), adapter sleeve (3) and hose nut (5). The cutting ring (2) and nut (4) are parts of commercial cutting ring fittings. Prior to assembly (6) the O-ring is to be removed, and after assembly it is to be put back.
APSON Hose Adaptors for Cutting Ring Connectors - Explosion- and Assembly-Drawing
Ord.-Nummer (1 of 2) Cutting Ring Connector Ø Hose L [mm] (approx.) Hose Nut Ord.-Nummer (2 of 2)
100-1313/7 12L DN6 40 100-1314
100-1414/71 12L 6x8 33 100-1334
100-1414/71 12L 6x9 33 100-0198