1. Introduction to top
The APSON High Voltage Ring HVR-2000 ø166 is a producer of
high-voltage field with a housing inside diameter of 166 mm, for DC
voltages up to -100 kV.
It is used as an auxiliary component for high rotation atomizers
for the external loading of electrostatically chargeable media, e.g.
for painting or for other electrostatic coatings.
The APSON High Voltage Ring HVR-2000 ø166 serves for the quality
improvement and increase of the efficiency of coating
processes.
Due to the design and the used materials it is easy to clean and
therefore particularly well suitable to the employment in automatic
systems for the processing of often to be changed aggressive media,
e.g. lacquers on water basis, solvents, caustic solutions, a.o.
The APSON High Voltage Ring HVR-2000 ø166
-
is environmental careful due to the high efficiency of the
painting process,
-
makes possible simple handling when assembling and
maintenance,
-
is easy to clean.
3. Structure to top
The APSON High Voltage Ring HVR-2000 ø166 consists mainly
of
-
a solid circular housing for the distribution of the high
voltage,
-
a high voltage connection with an axial connective opening
for the high voltage cable,
-
six candlelike high-voltage field producers with integrated
delimiters of short circiut current.
a = high voltage connection, b = high voltage
ring,
c = fixing bolt, d = high voltage candles (6),
e = turbine case, f = atomizer bell
The high voltage ring is attached at the housing of the high
rotation atomizer by means of radially arranged fastening
screw/s.
The high voltage connection is intended for high-voltage cables
with diameter from 6 to 7 mm. As contact a banana plug with a soldered
on Spax™-screw (see Technical Data) is screwed in into the end of the
high-voltage cable.
During the painting process the high voltage candles stay under
negative DC voltage, e.g. -75 kV. The atomizer bell of the high
rotation atomizer as well as that application object to be coated are
at earth potential (0 V).
Between the candle tips on the one hand, and the bell and
application object on the other hand, develops an electrical
field.
During the painting process the lacquer fog formed by the high
rotation atomizer flows through the electrical field and is negatively
charged. The positive potential of the application object causes, that
a high portion of the lacquer fog covers the application object
evenly.
5. Technical Data to top
Denomination: |
APSON High Voltage Ring HVR-2000 ø166 |
Media: |
Water-based lacquers, solvents, caustic solutions, a.o. |
High Voltage (HV): |
max. -100 kV DC voltage |
HV contact: |
Bananaplug ø4 mm with soldered Spax™-screw M2.5x16, type S,
galvanized |
Dimensions: |
Ring inside diameter 166 mm, max. candle wreath-ring outside
diameter 265 mm, overall height 320 mm |
Mass: |
approx. 2.6 kg |
6. Ordering Data to top
Denomination |
Quantity |
Part-Nr. |
APSON High Voltage Ring HVR-2000 ø166 |
1 |
130-A006 |
APSON SparepartPackage for HVR-2000 |
1 |
300-0019 |
APSON High Voltage Fat (tube a 100 g) |
1 |
200-0260 |