1. Introduction to top
The APSON Hosemountingtool HMT-1012
is a multi-purpose tool for cutting and
widening of fabric-reinforced high pressure
hoses. The tool is equipped with multiple expansion
plugs with different head diameters and two pairs of
adapting shells for different hose diameters.
This tool is used for applications where on-site
assembly is required and if difficult to handle stiff
tubings have to be exactly cut to length and are only
laboriously expandable.
-
Quick adjustable fixing device with
different hose adapting shells.
-
Quick adjustable expander device with
mandrels with different sizes.
-
Quick hose fixing and optimum tube cutting surface.
-
Easy to use, no special tools needed.
-
Light weight, ideal for mobile use.
3. Structure und Function to top
The APSON Hosemountingtool HMT-1012
consists of a rigid frame at which two clamping devices are arranged
perpendicular to each other. The vertical device is used for fixing the
hose and is screw-adjustably connected to the frame and therefore
adaptable to the hose diameter.
Legend: a = tool frame, b = fixing
device, c = adjustment screws, d = fixing jaws, e = hose adapter shells, f
= alternative hose adapter shells (rear mounted, and therefore not visible
in the picture), g = expander device, h = mandrels, i = cutting
guides.
Attention: Due to their design the mechanisms
of the clamping devices can exert large forces in their final positions.
To avoid bruising, gloves should be worn and the levers of the clamping
devices should only be operated in the area of their handles, and be
operated only slow!
Use: 1. Screw on the correct
mandrel to the tappet of the expander device. 2. Before clamping a hose, choose the
correct pair of adapter shells and install them to
the inner surface of the fixing jaws. 3.
Loosen the four screws at the rear of the frame of
the vertical fixing device so that it can be moved.
4. Open the operating lever of the
horizontal expander device. 5. With
opened operating lever of the fixing device, push the hose between the
adapter shells until reaching the expander mandrel. 6. Move the opened(!) fixing device as far as
possible down and tighten the screws (so that the hose can be properly
clamped when closing the fixing device). 7. Close carefully the lever of the fixing device.
8. Cut the hose (between the cutting
guides). 9. Open the fixing device and
remove the cut hose portion (remainder). 10. With opened fixing device, push the hose again
between the hose adapter shells near to the expansion mandrel (about 5 mm
in front of it, or as needed) of the expander device
and close carefully the fixing device. 11. Carefully and slowly operate several times the
lever of the expander device back and forth, until the hose is
expanded.
4. Technical Data to top
Designation: |
APSON Hosemountingtool HMT-1012 |
Sizes of hose adapter shells: |
DN4, DN6, DN12 mm * |
Sizes of the expander mandrels: |
DN4, DN6, DN12 mm * |
Dimensions, L x W x H: |
Approx. 210 x 46 x 176 mm |
Mass: |
Approx. 1.5 kg |
* Or according to customer specifications.
5. Ordering Data to top
Designation |
Ordering number |
APSON Hosemountingtool HMT-1012 |
100A1419 |
Options: According to customer
specifications.