1. Introduction
to top
The APSON Lacquer Changer LCC-2007
Compact is particularly suitable for applications in systems
with close spatial relations, e.g. robots, and in automatic systems for
the processing of often to change chemically aggressive media, e.g.
lacquers, solvents, caustic solutions, a.o. Due to the construction and
the large throughput it is very well rinsable and applicable both for
normal lacquers and metalic lacquers.
The compactness results
because all hoses lead bundled on a within seconds unscrewable
interface.
The
APSON LCC-2007 has the
following capability characteristics:
-
Environmental carefully due to short rinsing times.
-
Cost-saving due to very small consumption of cleaner medium.
-
High throughput and very good rinsing barness.
-
Simplest handling at assembling, maintenance and valve exchange.
-
Fast exchange of the complete lacquer changer (approx. 3 minutes).
-
Particularly suitable for close spatial relations (robots).
-
Deadthroom-free valves and optimized media channels for rinsing and throughput.
-
Visible switching status of the valves.
-
Bundled tubes routing (no tubes in the space).
-
Proactive maintenance possible due to leakage display of the valves.
-
Scalable, one to four valve blocks with in each case one to six valves.
3. Structure
to top
The APSON LCC-2007 has an
integrated cleaner with 2 valves, is modular expandable for max. 22
lacquer valves and has a central output channel. As valves both APSON
2/2-ways valves for standard applications and APSON 3/2-ways valves for
special applications are applicable.
The
APSON LCC-2007 consists of:
-
An interface for the pneumatic tubes and the inlets and
outlets for the media.
-
Max. four valve blocks with in each case six radially arranged
screwable sockets for APSON 2/2-ways or APSON 3/2-ways needle valves.
The APSON LCC-2007 is pneumatically controllable.
Depending upon execution and valve assembly the following
applications are possible:
-
Applications with 2/2-ways valves and media branch tubings.
-
Applications with 2/2-ways valves and constant media circulation.
-
Applications with 3/2-ways valves (media circulation
alternating with media pass through).
5. Technical Data
to top
Denomination: |
APSON LCC-2007 |
Media: |
Lacquers, solvent, caustic solutions, a.o. |
Medium pressure: |
max. 12 bar |
Valve assembly: |
|
Control air pressure: |
min. 6 bar upto max. 8 bar, measured on the valve |
Materials: |
|
Seals: |
Teflon™, Viton compound™, or on customer's request |
Control air connection: |
for tube 4 x 2.7 mm, (before the interface reduced to 3x2 mm) |
Media inputs: |
for tube 6x4 mm |
Medium output: |
Screwable connection G1/4", for tube 6x4 mm |
Dimensions: |
-
without valves: ø 110 mm, height 420 mm
-
with valves: ø 125 mm, height 420 mm
|
Mass: |
Aluminum approx. 5 kg, inoxidable steel approx. 14 kg |
6. Ordering Data
to top
Denomination |
Part-Nr. |
APSON Lacquer Changer LCC-2007 Compact, up to 24 valves (max. 22
lacquer valves and 2 valves for the integrated cleaner) |
050-A001 |
Options:
-
Medium-touching sections made of aluminum or inoxidable steel,
depending upon customer's request
-
Alternative valve assembly; 3/2-ways valves for media
circulation alternating with media pass through