1. Introduction
to top
The APSON Lacquer Changer LCS-2000
Standard is particularly suitable for applications in automatic
systems with chemically aggressive media, e.g. lacquers, solvents, caustic
solutions, a.o. Due to the construction and the large throughput it is
very good rinsable and usable both for normal lacquers and metalic
lacquers. Furthermore, this type of lacquer change-over switch can be also
used as rinsable distributor (one inlet, several outlets) or as rinsable
concentrator (several inlets, one outlet).
The APSON LCS-2000 has the following capability characteristics:
-
Environmental carefully due to short rinsing times.
-
Cost-saving due to minimized medium consumption.
-
High throughput and very good rinsing barness.
-
Simplest handling when assembling and at maintenance.
-
Very compactly and suitably for close spatial relations.
-
Deadroom-free valves, and rinsing and throughput-optimized medium channels.
-
Consists of inoxidable steel, thus durably and corrosion resistant.
-
Insensitive to caustic solutions and weak acids.
-
Scalable for the desired number of input media.
3. Structure and Function
to top
The APSON LCS-2000 is standardly made of inoxidable steel.
It consists of:
-
A selectable number of lacquer changer switch blocks.
-
A final lacquer changer switch block for the medium outlet.
-
An exchangeable APSON Pulse Cleaner or APSON Turbo Cleaner.
The lacquer changer switch blocks have a seal at each end of the
output channel for sealing the neighbouring blocks as well as two pins
each for centering the blocks when assembling the lacquer changer. Each
block has two screwable sockets for pneumatically controllable APSON
2/2-Ways Lacquer Valves 200x.
During the rinsing cycle, the cleaner feeds several times
alternating for short periodes solvent and air into the central
channel.
Per block, maximal two channels can be independently connected
through to the central channel. The lacquer changer is preferentially
installed with the cleaner block at the top.
4. Technical Data
to top
Denomination |
APSON LCS-2000 |
Media |
Lacquers, solvent, caustic solutions, a.o. |
Medium pressure |
max. 12 bar |
Valve assembly |
2/2-ways lacquer valves for branch lines or constant medium
circulation (see Options) |
Materials |
Inoxidable steel |
Seals |
Viton™, or on customer's request |
Medium inlets |
for hose D = 8 mm, d = 6 mm (or on customer's request) |
Medium outlets |
for hose D = 8 mm, d = 6 mm (or on customer's request) |
Dimensions of one block (LxWxH) |
|
Mass |
approx. 400 g per lacquer change-over switch block |
5. Ordering Data
to top
Denomination |
Part-Nr. |
APSON Lacquer Changer Block LCB-2000, without cleaner |
050-Axxx |
APSON Pulse Cleaner PC-2000 (standard cleaner) |
070-A005 |
APSON Turbo-Pulse Cleaner TPC-2001 (alternative cleaner) |
070-A002 |
APSON Turbo Cleaner TC-2002 (alternative cleaner) |
070-A004 |
APSON 2/2-Ways Lacquer Valve LV-2000-2.2 (sparepart) |
060-A008 |